Creative Hardware

This Laser Harp Reads How Hard You Pluck a Beam of Light — and Hooks Up to a Fog Machine

Builder Derrick (a.k.a. DJ Baja Blast) wired photoresistors, an accelerometer, and an ultrasonic sensor into a Teensy 4.1 running Karplus-Strong string synthesis — turning laser beams into an instrument that bends pitch by tilting and swells volume by how fast you pluck.

The laser harp is one of the oldest tricks in the DIY-instrument book — stretch a fan of laser beams across photosensors, let a finger break a beam, trigger a note. Hackaday’s own archive traces the format back to at least 2009. What makes builder Derrick, who goes by DJ Baja Blast, worth paying attention to is everything he added on top of that fifteen-year-old basic idea.

Analog voltage instead of a simple trigger

Most laser harps treat each beam as a binary switch: broken or not. Derrick’s build instead reads the photoresistors as an analog voltage, tracking the rise and fall of that voltage as a finger passes through the beam — which means the instrument can tell the difference between a fast, hard pluck and a slow, gentle one, and map that directly to volume. “Faster, louder” and “quieter, slower plucks,” as the build describes it, is a meaningfully more expressive interaction than a harp that can only say yes-or-no about whether a string was touched.

That alone would make for a solid build. Derrick kept going: an onboard accelerometer lets the whole instrument act as a tilt controller, bending the pitch of whatever note is currently sounding as the harp is physically tilted — turning a static array of light beams into something with continuous, gestural pitch control, closer to a theremin or a pitch-bend wheel than a simple plucked string. An ultrasonic distance sensor adds a second, separate theremin-style control layer, and a side-mounted encoder wheel gives a third. Add an optional looper pedal input and an aux-in jack, and what started as a laser harp has quietly become a small modular performance instrument with five distinct inputs beyond basic note selection.

Real string physics, not a sample

The sound itself runs on a Teensy 4.1 using the Karplus-Strong string synthesis algorithm — a technique that models how an actual plucked string vibrates and decays, rather than simply playing back a recorded or synthesized tone. That’s a meaningful choice: Karplus-Strong synthesis produces output that responds naturally to how a note is excited, which pairs well with the harp’s analog pluck-speed sensing. The Teensy can drive an onboard speaker directly or send MIDI out to other gear, and Derrick says more features are planned.

And then there’s the showmanship: the instrument is plumbed to connect to a fog machine, which Derrick notes isn’t just for visual effect — it also helps players (and the audience) actually see where the laser “strings” are in physical space, solving the laser harp’s oldest practical problem in the same gesture that makes it look better on stage. The frame itself is built from cherry and walnut, giving the whole thing a furniture-grade finish that belies the amount of embedded electronics inside it.

Full build files are on GitHub, and Derrick’s own site carries a complete write-up for anyone looking to replicate — or improve on — the design.