Creative Hardware

A Landscaper Built an Attic Full of SDRs to Listen to Space — and Wrote the Software Himself

Starlab Observatory started with a $35 radio and a blurry ISS image. It grew into a scheduled, multi-receiver listening station for weather satellites, the ISS, and general VHF/UHF traffic, running on an ESP32 antenna switch and self-written software.

There’s a specific kind of hook that pulls people into software-defined radio: the moment a $35 receiver and a homemade antenna pull a genuinely recognizable image out of thin air for the first time. For Tommy Lather, a landscape contractor with no engineering background, that moment came from a partial, barely-legible photo captured off the ISS during one of its scheduled imaging events. “You really had to use your imagination to see it,” he writes, “but it was there! I was hooked.” Published to Hackster.io on November 7, his project — Starlab Observatory — documents what happened after that hook landed: a full attic antenna farm, a custom-built switching system, and software he wrote himself to manage all of it.

The hardware: five receivers, one antenna farm

Starlab’s current setup runs across an ESP32-S3, an Airspy R2, an RTL-SDR v3 and v4, and an SDRPlay RSP1B — a spread of receivers that reflects how the project grew organically rather than being planned from day one. The attic itself hosts a discone antenna for general VHF/UHF monitoring (feeding a Nooelec LaNA preamp), a homemade copper V-dipole built specifically to catch METEOR weather satellites around 40 feet up with a SAWbird+ NOAA preamp mounted right at the antenna, and a QFH antenna tuned for the 137 MHz band NOAA’s weather satellites transmit on.

An ESP32 doing traffic control

Running that many receivers off that many antennas creates a routing problem: which receiver gets which antenna, and when. Lather’s answer is a dedicated ESP32-based antenna switch that automates the handoff, paired with scheduling software — Starlab itself — that he describes building with AI coding assistance to manage captures across the whole setup without having to babysit every satellite pass manually. That’s a meaningfully different workflow from the classic RTL-SDR hobbyist script-and-cron-job approach: a purpose-built scheduler that knows what’s overhead and when, routing the right antenna to the right receiver automatically.

Why this keeps happening

Amateur reception of NOAA’s APT weather-satellite imagery has been a well-documented hobbyist pastime for over a decade — RTL-SDR.com’s own tutorial on the subject, still actively maintained, has walked newcomers through exactly this kind of build for years, and the barrier to entry keeps dropping as both the hardware and the decoding software mature. What’s notable about Starlab isn’t the individual pieces — SDRs, APT decoding, and antenna switching are all established techniques — it’s that one person with zero formal RF background assembled all of it into a working, scheduled system, and the on-ramp for that kind of project keeps getting shorter every year.